Krohne flow transmitter manual

The overall functionality of the OPTISONIC OPTISONIC OPTISONIC flowmeter, is the continuous measurement of actual volume flow, mass flow, flow speed, velocity of sound, gain, SNR, totalized flow mass and diagnosis values. Certification The device fulfils the statutory requirements of the following EC directives. The flow output can be selected as Volumetric, Mass or Velocity units. The ST and ST can support up to two flow sensors and provides the average flow of the two. Krohne Coriolis Flow Meter. Krohne Enviromag Manual Flow Meter Installation Rules Krohne Flow Transmitter Mass Flow Meter Installation. The H flowmeter for measurement of the volumetric or mass flow rate of liquids, gases and steam is an all-metal flowmeter that operates on the float measuring www.doorway.ru flow-dependent vertical position of the float in the measuring tube is transmitted by a magnetic coupling system to the scale in the indicator part.

KROHNE, Inc. For Assistance Call ( ) Installation and Operating Instructions OPTISOUND™ Series Continuous Ultrasonic Level Transmitter using VU30 Series. KROHNE, IN c. For Assistance Call Preliminary Manual Version September Contents. Head Units In Flow configuration the level measurement (bottom of flume/weir to surface of level) is referred to a head height. Enter the units in flow rate that will be. The OPTIBAR DP is a differential pressure transmitter with integrated absolute pressure measurement. It offers a high degree of modularity for various flow, hydrostatic level or process pressure applications. For DP flow measurements it can be perfectly combined with the KROHNE primary elements (e.g. orifice plates or pitot tubes).

If flowmeters need to be returned to Krohne, please note the information given on the last-but-one page of these Instructions. Krohne regrets that it cannot repair or check your flowmeter(s) unless accompanied by the completed form sheet. • Electro magnetic flowmeters with the IFC signal converter meet the requirements of the. KROHNE, IN c. For Assistance Call Preliminary Manual Version September Head Units In Flow configuration the level measurement (bottom of. Flow measurement of conductive liquids, e.g. coolants, cold/hot water, chemicals, etc. Best-in class temperature range, accuracy, pressure drop and flow range; Ultra-compact design for parallel installation and tight spaces; 4 20 mA, pulse, frequency, Modbus, IO-Link.